Trailer Dimensions
- Length with tongue: 104 ¾”
- Length without tongue: 55″
- Width with fenders: 68 ½”
Trailer Specifications
- Frame: 2” x 2” x 1/8” tubular steel
- Paint: Powder paint, orange with zinc primer
- Salt spray fog: 1,000 hours
- UV Resistance: 500 hours
- Axle and Springs: Straight tubular steel 3500 pounds
- 15” Wheels and Tires: 5 lug – P205-75/R15
- Fenders: 16 – gauge steel
- Tongue and Safety chains: 2” hitch, ¼” safety chains with hooks
- Jacks: Adjustable 10” jacks (2000 lbs. capacity) on each corner of the trailer.
- Tail lights: Dual combination reflective lights with stop, tail and turn signal. License plate bracket.
- Lift winch: Gear ration -4:1, Load Capacity-1200 lbs. Reel Capacity 58 ft.
- Wiring: Enclosed in jacketed cable or conduit.
- Battery/Controller box: Steel fabrication, lockable, hinged, vented.
Sign Display
- Height: 48”
- Length: 96”
- Width: 3 3/8″
- Material: .080 Aluminum frame 48″ x 96″ w/(2) 47 3/4″ cross members
- .063 Aluminum front panel 48″ x 96″
- .063 Aluminum back panel 48″ x 96″
- Back skin: constructed of .063 aluminum
- Viewing Window: 125 thick polycarbonate with UV matte finish
- Paint: All powder coated
- Flat black finish to reduce glare
- Salt spray fog: 1,000 hours
- UV resistance: 500 hours
- LED bulbs: (25) yellow/amber Par 46 LED’s with 360″ high impact plastic visor
- Push on type connectors to prevent separation due to vibration during travel and operation.
Photocell Assembly
- Monitors ambient light conditions and adjusts brightness accordingly
Power and Charging
- Battery bank:
- Typical installation is one pair (225 amp) 6-volt batteries wired for 225 combined amps maximum output.
- Electronic Circuitry:
- Solid state, reverse polarity protection, properly fused, disconnects on all cables.
Solar Panel
- Typical Electrical Characteristics 40 W
- Voltage at Pmax (V mp) 17.3 V
- Current at Pmax (IMP) 2.31 A
- Short-Circuit Current (Isc) 2.57 A
- Open-Circuit Voltage (Voc) 21.6 V
Solid State Regulator
Electrical Specifications:
- Voltage: 12/24V
- Rated Solar Input: 10A
- Rated Load Current: 10A
- Equalization Voltage: 14.8V
- Boost Battery: 14.4V
- Float Battery: 13.6V
- Low Voltage Disconnect: 11.1V
- Low Voltage Reconnect: 13.1V
- Self-Consumption: 6 mA
- Operating Temp. -35 to +55ºC
15 Light Control Box:
- Auto - automatically adjusts the power to the lights from 100% (daytime use) to 50% (nighttime use) depending on the ambient light. The auto dimming is controlled through a photocell mounted in the bottom of each arrow board where it will be protected from vehicle headlights and street lamps.
- Bright - maintains 100% power to the lights regardless of the ambient light.
- Dim - maintains 50% power to the lights regardless of ambient light.
- The Control Box has (7) flashing modes to choose from:
- Single flashing arrow Left
- Single flashing arrow Right
- Progressive arrow Left
- Progressive arrow Right
- Double flashing arrow
- Caution center bar
- Caution four corners
Control Functions:
- Power Switch - Provides power from the control box to the Arrow Board
- Power Indicator Light - The LED indicates the Control Box has power and is ready for operation
- Fuse - Protects the wiring from damage in the event of a malfunction
- Mode Selector – Provides selection of the warning modes.
- Manual Dim Switch – Provides the user with the ability to override the photocell used for the automatic dimming when an unusual situation occurs (such as the vehicle being parked under a streetlight at night).