Trailer Dimensions
- Length with tongue: 104 3/4″
- Length without tongue: 55″
- Width with fenders: 68 1/2″
Trailer Specifications
- Frame: 2″ x 2″ x 1/8″ tubular steel
- Axle and Springs: Straight tubular steel 3500 pounds
- Wheels and Tires: 5 lug – P205/75R15
- Fenders: 16 – gauge steel
- Tongue and Safety chains: 2″ hitch, 1/4″ safety chains with hooks
- Jacks: Adjustable 10″ jacks (2000 lbs. capacity) on each corner of the trailer. Tongue jacks.
- Tail lights: Dual combination reflective lights with stop, tail and turn signal. License plate bracket.
- Lift winch: Gear ration -4:1, Load Capacity -1200 lbs. Reel Capacity 58 ft.
- Wiring: Enclosed in jacketed cable or conduit
- Battery/Controller box: Steel fabrication, lockable, hinged, vented.
Sign Frame
Frame constructed of extruded aluminum, 6063 alloy with a T5 temper.
- Length: 82”
- Height: 35”
- Depth: 6”
- Mounting Studs: constructed of .080 aluminum
- Back skin: constructed of .080 aluminum
- Viewing Window: .125 thick polycarbonate with UV matte finish
- Paint: Powder paint, flat black finish
- Salt spray fog: 1,000 hours
- UV Resistance: 500 hours
Display Module 6 x 9 pixel, 1.58″ pitch
Specifications:
Optical:
- LED pixel is formed using 3 LED’s
- Pixels are arranged in a 6 wide by 9 tall matrix array.
- LED pixel spacing is 1.58 inches x 1.58 inches
- Agilent Amber lamps, 592 NM wavelength, 30 degree viewing angle, bins 4.2 cd to 12 cd
- LED module is painted a flat black to improve contrast and reduce glare.
- Supports up to 223 predefined messages (text).
- Supports storage of up to 100 changeable messages, each with up to 4 pages of text.
- Four different fonts:
- 5×7
- 7 x 7 bold
- 4 x 6
- 4×7
Photocell Assembly
- Monitors ambient light conditions and adjusts brightness accordingly
NTCIP
- Supports the latest version of NTCIP and can be CERTIFIED by third party for its full functionality and conformance.
Power and Charging
- Battery bank:
- Typical installation is two pair (225 amp) 6-volt batteries wired for 450 combined amps maximum output.
- Electronic Circuitry:
- Solid state, reverse polarity protection, properly fused, disconnects on all cables.
- Battery Charger:
- Input volts 105-130VAC
- Max. Amp Draw 15
- Max. Watt Draw 1000
- Output Amps 60
Solar Panel
- Typical Electrical Characteristics 120 Watt Panel
- Voltage at Pmax (V mp) 17.3 V
- Current at Pmax (IMP) 6.94 A
- Short-Circuit Current (Isc) 7.71 A
- Open-Circuit Voltage (Voc) 21.6 V
Typical electrical characteristics
Regulator
CC-IP30-30:
- 3-position battery select: gel, sealed, or flooded
- 100% solid state
- LED’s indicate battery status and faults.
- Rated Solar Current 30 amps
- Rated Load Current 30 amps
- System Voltage 12/24 volts