High Water Sensor Beacon ECO-128-D12
Sensor Activated ECO Beacons

Our ECO-128-D12 is equipped with a high water sensor that activates the hazard beacons when the sensor detects rising water levels, and system is deactivated once the water level decreases. This system is ideal for those locations that are notorious for those flooding roads that could cause traffic accidents. With this system accidents are kept to a minimum in those areas for the very reason the drivers are cautioned of road conditions.

ECO128-D12 on Pole

solar

The Solar School Zone only utilizes the most up to date solar and electronics to maintain power levels through rain, shine, sleet, or snow


LED

 

LED technology increases life expectancy of the beacon and also burns less energy than conventional bulbs


MUTCD
Meets MUTCD (Manual on Uniform Traffic Control Devices)

 


NCHRP

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)


ITE

Meets ITE Standards (Institute of Transportation Engineers)


 

high water webpage brochure

gsa_logo_over (1)

 

 

ECO Solar Beacon Options
ADD10W Additional 10 watt solar panel.
ADD20W Additional 20 watt solar panel.
DED-LED Deduct 12″ LED and housing
ECO-R ECO Solar Beacon Radar for Vehicles.  Speed range:  5-99 mph.  Also can be set for KPH
ECO-RP ECO Solar Beacon Radar for Pedestrians.  Speed range:  .5-38 mph.
ECO-RTM ECO Solar Beacon Radar for Towmotor.  Speed range:  .2-16 mph.
ECO-SS ECO Solar Beacon Speed Selector switch designed to set threshold to trigger radar.  Set in 5 minute increments.
Standard Options
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE.  15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CTR-MB Mounting hardware per cabinet (if K&K CTR pole not purchased) to include:  pole plate with set screw; 1 1/2″ nipple; tristud elbow with set screw; rubber washer and box bracket.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include:  pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CrossTalk and SPLasher Options
CrossTalk Wireless Beacon Control System
CTS-BPMS Bollard Pedestrian Motion Sensor – (for CrossTalk or SPLasher)
CTS-B Bollard – Height: 42″ (for CrossTalk or SPLasher)
CTS-HWS High Water Sensor – 12V epoxy-coated sensor; housed in high impact PVC construction; will detect any conductive non-flammable liquid.  (for CrossTalk or SPLasher)
CTS-MS Moisture Sensor – Dual 12V epoxy-coated sensors; no mechanical parts; triggered by a moisture bridge across the sensor contacts.  (for CrossTalk or SPLasher)
SPL-FSC Fire Station Control – Includes splasher and antenna; 12V power supply; momentary push-button switch; LED light when powered on.  (for SPLasher only)
SPL-DBF Double Button Fob – Double button for powering unit on to time out or for immediate cut-off  (700 ft line-of-sight range).  (for SPLasher only)
SPL-SBF Single Button Fob – Single button for powering unit on to time out (700 ft line-of-sight range).  (for SPLasher only)
SPL-RFA RF Antenna –  2.4ghz CE, FCC approved RF-DANT with built in RF-DP  (1200 ft line-of-sight range).  (for SPLasher only)
SPL-RPB Radio and Push Button Kit.  Wireless Pedestrian Communication System (CrossWalk)
SWK Switch, key operated.

Download Brochure Here

ECO-128-D12_specs

ECO-128-D12 wiring