Model E117-D12
Stop – 24/7

← Back To Previous Page

Model E117-D12

Flashing 24 hours a day, seven days a week, the model 117-D12 stop beacon is an advanced 24-hour solar flasher. Whether in congested cities, or on rural and remote roadways, the 24/7 Stop Sign flasher is used to enhance the visibility at Stop, Do Not Enter, “danger” crossings, and road construction, etc. The 24/7 Stop Beacons can be configured to run anywhere in the country.

 

E117-D12

solar

Our Solar Stop Beacons utilize the most up to date solar and electronics to maintain power levels thru rain, shine, sleet, or snow

LED

LED technology increases life expectancy of the beacon and also burns less energy than conventional bulbs

MUTCD

Meets MUTCD (Manual on Uniform Traffic Control Devices)

NCHRP

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)

ITE

Meets ITE Standards (Institute of Transportation Engineers)

..

 

 

  • Continuous Flash
  • Dual RED 12″ LED`s
  • Compact Design
  • Meets MUTCD
  • LED Technology
  • Solar Powered
  • NCHRP 350 Crash Tested and Accepted
  • Meets ITE Standards
  • Solid State Flasher

 

ADDTR Free upgrade to solar tilt and rotate.
Bat-12-18A 18 amp, 12V, AGM battery; Dimensions:  7.13″x2.99″x6.54″
CB-BBK Box bracket with 1 clamp.  Two (2) required.  Price/each
CCTR-11 COMPLETE 11′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE.  11′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-12 COMPLETE 12′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 12′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-14 COMPLETE 14′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 14′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-20 COMPLETE 20′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE.  20′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include:  pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CTR-PC Pole collar to strengthen CTR pole base connection.
CTR-UBH Mounting hardware for head (U-bolt).
CTR-UBS Mounting hardware for sign (U-bolt).   Two (2) required.
CTR-UC U-Channel post break away kit, crash tested and 3lb u-channel post included.
R1-1-XXXX-DG  Replace XXXX with size 3030, 3636, or 4848 – “Stop” Diamond Grade sign
R1-1-XXXX-HI  Replace XXXX with size 3030, 3636, or 4848 – “Stop” High Intensity sign
UCHANNEL 8′ U-channel post (3lb per ft).
UP-CC-IP30-30 Upgrade to 30 amp regulator with meter.

 

Question: How long does the battery last?

Answer: Typically the average life span of a battery is anywhere from 3-5 years.

 

Question: Do you provide a battery with the system?

Answer:  Yes, our standard system has (1) 18 amp hour sealed battery.

 

Question: What is the typical battery backup? (days to run without solar input)

Answer: Our standard systems have at least 7 days of battery backup.

 

Question:  Does signage come with the unit?

Answer:  Our standard system does not come with a sign but it may be purchased as an option. Please see our options tab for further information.

 

Question:  How many hours per day are these systems designed to run?

Answer:  Our Systems are designed to run 24 hours a day 7 seven days a week. Our standard system will work in most states but some of the more northern territories may require additional solar & batteries.

 

Question: Do I furnish my own pole or can I purchase one from your company?

Answer:  You can do whichever is most convenient for you. If you would like to use your existing pole simply let us know what type of pole you will be mounting to so we can supply the correct mounting hardware or If you would like us to provide a pole please see our optional poles under the options tab on the website.

 

Question:  What is the lead time for these systems?

Answer:  Our typical lead time is 4-6 weeks ARO.

 

Question:  Do you provide any installation, mounting, and wiring instructions?

Answer:  Yes we do provide all this information and more available on our website for each model under “Support Documents”.