E118-D12
Solar Hazard Beacons

Flashing 24 hours a day, seven days a week, the model 118-D12 Hazard beacon is an advanced 24-hour solar flasher. Whether in congested cities, or on rural and remote roadways, the 24/7 Hazard flasher are used to help warn vehicular traffic to possible hazardous areas or intersections ahead. dangerous curves, stop ahead, dangerous crossings, road construction, and speed zones are just a few of the many applications where solar stationary flashing beacons will enhance the visibility of roadway signage.

 

Hazard Beacon E118-D12


solar

Our Solar Stop Beacons utilize the most up to date solar and electronics to maintain power levels through rain, shine, sleet, or snow


LED

LED technology increases life expectancy of the beacon and also burns less energy than conventional bulbs


MUTCD

Meets MUTCD (Manual on Uniform Traffic Control Devices)


NCHRP

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)


ITE

Meets ITE Standards (Institute of Transportation Engineers)


.


 

Our SPLasher device is a compact, all-in-one solar controller, flasher, and auto-dimmer for flasher beacons. The way it works is energy efficient and simple! The SPLasher uses Maximum Power point Tracking (MPPT)which extracts maximum power from the solar panel regardless of the environment.

SPLasher (2-27-14)

 

ADDTR Free upgrade to solar tilt and rotate.
Bat-12-18A 18 amp, 12V, AGM battery; Dimensions:  7.13″x2.99″x6.54″
CB-BBK Box bracket with 1 clamp.  Two (2) required.  Price/each
CCTR-11 COMPLETE 11′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE.  11′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-12 COMPLETE 12′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 12′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-14 COMPLETE 14′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 14′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-11 COMPLETE 11′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE.  11′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include:  pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CTR-PC Pole collar to strengthen CTR pole base connection.
CTR-UBH Mounting hardware for head (U-bolt).
CTR-UBS Mounting hardware for sign (U-bolt).   Two (2) required.
CTR-UC U-Channel post break away kit, crash tested and 3lb u-channel post included.
UCHANNELL 8′ U-channel post (3lb per ft).
UP-CC-IP30-30 Upgrade to 30 amp regulator with meter.
UCHANNELL 8′ U-channel post (3lb per ft).
UP-CC-IP30-30 Upgrade to 30 amp regulator with meter.
W3-1-XXXX-DG  Replace XXXX with size 3030, 3636, or 4848 – “Stop Ahead” Diamond Grade sign
W3-1-XXXX-HI  Replace XXXX with size 3030, 3636, or 4848 – “Stop Ahead” High Intensity sign
W3-3-XXXX-DG  Replace XXXX with size 3030, 3636, or 4848 – “Signal Ahead” Diamond Grade sign
W3-3-XXXX-HI  Replace XXXX with size 3030, 3636, or 4848 – “Signal Ahead” High Intensity sign
W8-5-XXXX-DG Replace XXXX with size 3030, 3636, or 4848 – “Slippery When Wet” Diamond Grade sign
W8-5-XXXX-HI Replace XXXX with size 3030, 3636, or 4848 – “Slippery When Wet” High Intensity sign
W8-6-XXXX-DG  Replace XXXX with size 3030, 3636, or 4848 – “Truck Crossing” Diamond Grade sign
W8-6-XXXX-HI  Replace XXXX with size 3030, 3636, or 4848 – “Truck Crossing” High Intensity sign

 

Question: How long does the battery last?

Answer: Typically the average life span of a battery is anywhere from 3-5 years.

 

Question: Do you provide a battery with the system?

Answer:  Yes, our standard system has (1) 18 amp hour sealed battery.

 

Question: What is the typical battery backup? (days to run without solar input)

Answer: Our standard systems have at least 7 days of battery backup.

 

Question:  Does signage come with the unit?

Answer:  Our standard system does not come with a sign but it may be purchased as an option. Please see our options tab for further information.

 

Question:  How many hours per day are these systems designed to run?

Answer:  Our systems are designed to run 24 hours a day 7 seven days a week. Our standard system will work in most states but some of the more northern territories may require additional solar & batteries.

 

Question: Do I furnish my own pole or can I purchase one from your company?

Answer:  You can do whichever is most convenient for you. If you would like to use your existing pole simply let us know what type of pole you will be mounting to so we can supply the correct mounting hardware or If you would like us to provide a pole please see our optional poles under the options tab on the website.

 

Question:  What is the lead time for these systems?

Answer:  Our typical lead time is 4-6 weeks ARO.

 

Question:  Do you provide any installation, mounting, and wiring instructions?

Answer:  Yes, we do provide all this information and more available on our website for each model under “Support Documents”.

E118-D12 Brochure

E118-D12 specs

E118-D12 Split Heads Spun Pole Assembly

E118-D12 Split Heads U-Channel Post Assembly

E118-D12 Split Heads Wood Post Assembly

E118-D12 Stacked Heads Spun Pole Assembly

E118-D12 Stacked Heads U-Channel Post Assembly

E118-D12 Stacked Heads Wood Post Assembly

E118-D12 wiring

ESERIES INSTALLATION CHECKLIST – SOLAR FLASHER BEACON

Pedestal base pattern