Mailing Address:

    K&K Systems
    P O Box 1065
    Verona, MS 38879

    Shipping Address:

    K&K Systems
    687 Palmetto Road
    Tupelo, MS 38801

    Phone:

    662-566-2025
    888-414-3003
    Fax: 662-566-7123

    Sales Contact:

    Sales@k-ksystems.com

    Technical Contacts:

    For technical support questions, contact: Support@k-ksystems.com

    Become a Dealer

    Application and Details

    Other Contacts:

    For invoice or billing issues, contact: accounting@k-ksystems.com
    For shipping inquiries, contact: shipping@k-ksystems.com
    For other product inquiries, contact: Sales@k-ksystems.com

Overview

 

Equipped with a high water sensor that activates the hazard beacons when sensor detects high water level and system is deactivated once water level decreases below preset height. This system is ideal for those locations that are notorious for those moist conditions that could cause traffic accidents due to the roads being flooded. With this system accidents are kept to a minimum in those areas for the very reason the drivers are cautioned of road conditions

solarThe Solar School Zone only utilizes the most up to date solar and electronics to maintain power levels through rain, shine, sleet, or snow

 

 


LED

LED technology increases life expectancy of the beacon and also burns less energy than conventional bulbs

 

 


MUTCD

 

Meets MUTCD (Manual on Uniform Traffic Control Devices)

 


NCHRP

 

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)

 


ITE

Meets ITE Standards (Institute of Transportation Engineers)

 

 

High Water Sensor

moisture sensor

Simple Design

PVC Construction

 

 

 


Our SPLasher device is a compact, all-in-one solar controller, flasher, and auto-dimmer for flasher beacons. The way it works is energy efficient and simple! The SPLasher uses Maximum Power point Tracking (MPPT) which extracts maximum power from the solar panel regardless of the environment. This is how it works with our High Water sensor activation: The SPLasher is inside the control cabinet of the beacon with the High Water sensor hooked up in the “switch”activation port. When the sensor senses high water level, it’ll tell the SPLasher, which will tell the flashers to activate. Once the sensor no longer senses the high water level, the flashers will cut off automatically.

SPLasher (2-27-14)

 

 

gsa_logo_over (1)