Solar Stop Beacon 117-D12
Solar Stop Beacons

← Back To Previous Page

Solar Stop Beacon 117-D12

Flashing 24 hours a day, seven days a week, the model 117-D12 stop beacon is an advanced 24-hour solar flasher. Whether in congested cities, or on rural and remote roadways, the 24/7 Stop Sign flasher is used to enhance the visibility at Stop, Do Not Enter, “danger” crossings, and road construction, etc. The 24/7 Stop Beacons can be configured to run anywhere in the country.

 

 * Shown with optional signage and Round Aluminum Crash Tested Pole

Our Solar Stop Beacons utilize the most up to date solar and electronics to maintain power levels through rain, shine, sleet, or snow

LED technology increases life expectancy of the beacon and also burns less energy than conventional bulbs

Meets MUTCD (Manual on Uniform Traffic Control Devices)

 

Meets ITE Standards (Institute of Transportation Engineers)

The system fits into Safe Routes to School (SRTS) infrastructure funding models

NCHRP 350 Crash Tested and Accepted (National Cooperative Highway Research Program)

 

 

 

 

 

 

 

Our SPLasher device is a compact, all-in-one solar controller, flasher, and auto-dimmer for flasher beacons. The way it works is energy efficient and simple! The SPLasher uses Maximum Power point Tracking (MPPT) which extracts maximum power from the solar panel regardless of the environment.

 

  • Continuous Flash
  • Dual RED 12″ LED`s
  • Aluminum Control Cabinet
  • Meets MUTCD
  • LED Technology
  • Solar Powered
  • NCHRP 350 Crash Tested and Accepted
  • Meets ITE Standards
  • Solid State Flasher

 

AC-OPT80 For Models: 112-S12R; 112-D12R; 113-D8; 117-D12; 114-D8; 118-D12. Remove 80W solar panel, solar panel mounting bracket, large battery box and regulator. Add 20W power supply and small control cabinet.
ADD20W Additional 20 watt solar panel.
ADD40W Additional 40 watt solar panel
ADD80W Additional 80 watt solar panel.
BAT-12-55A 55 amp, 12V, AGM battery, Dimensions:  9.40″x5.50″x8.20″
BAT-12-100A 100 amp, 12V, AGM battery; Dimensions: 12.16″x6.75″x8.70″.
BAT-12-100W-27 100 amp, 12V, Wet cell battery; Dimensions: 12.16″x6.75″x8.70″
CB-BBK Box bracket with 1 clamp.  Two (2) required.  Price/each
CCTR-11 COMPLETE 11′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE.  11′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-12 COMPLETE 12′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 12′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-14 COMPLETE 14′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 14′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-15 COMPLETE 15′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE. 15′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CCTR-20 COMPLETE 20′ SPUN POLE KIT TO INCLUDE ALL MOUNTING HARDWARE.  20′ crash tested 4″ round aluminum spun pole with pedestal base, top cap, anchor bolts, signal head mount arm and control box mount.
CL-1023 Cabinet lock Type 2 with tapered latch and 2 keys.
CL-1026 Cabinet lock Type 1 police lock with tapered latch and 2 long keys.
CL-3PT 3 point locking system with Type 1 or Type 2 lock and 2 keys.
CTR-MB Mounting hardware per cabinet (if K&K CTR pole not purchased) to include:  pole plate with set screw; 1 1/2″ nipple; tristud elbow with set screw; rubber washer and box bracket.
CTR-MH Mounting hardware per head (if K&K CTR pole not purchased) to include:  pole plate with set screw; 6″ nipple; tristud elbow with set screw.
CTR-PC Pole collar to strengthen CTR pole base connection.
CTR-UBB Mounting hardware for box (U-bolt).      Two (2) required.
CTR-UBH Mounting hardware for head (U-bolt).
CTR-UBS Mounting hardware for sign (U-bolt).   Two (2) required.
CTR-UC U-Channel post break away kit, crash tested and 3lb u-channel post included.
R1-1-XXXX-DG  Replace XXXX with size 3030, 3636, or 4848 – “Stop” Diamond Grade sign
R1-1-XXXX-HI  Replace XXXX with size 3030, 3636, or 4848 – “Stop” High Intensity sign
SWXP OPTION FOR HAZARD BEACON.  Microwave motion detector that detects pedestrians standing curbside and triggers a flasher switch.
TC26-B OPTION FOR HAZARD BEACON.  Microwave motion detector that detects oncoming vehicles and triggers operation of a flasher switch.
UCHANNEL 8′ U-channel post (3lb per ft).
UP-CC-IP30-30 Upgrade to 30 amp regulator with meter.

 


Question: How long does the battery last?

Answer: Typically the average life span of a battery is anywhere from 3-5 years.

 

Question: If I furnish my own battery what type do I need?

Answer: You will need a 110 amp deep cycle battery. They make various types of batteries from wet cell to AGM batteries. Our recommendation would be a sealed AGM battery for maintenance reasons.

 

Question: Do you provide a battery with the system?

Answer:  Our standard system does not come with a battery but it may be purchased as an option. Please see our options tab for further information.

 

Question: What is the typical battery backup? (days to run without solar input)

Answer: Our standard systems have at least 7 days of battery backup using a 110 amp battery.

 

Question:  Does signage come with the unit?

Answer:  Our standard system does not come with a sign but it may be purchased as an option. Please see our options tab for further information.

 

Question:  How many hours per day are these systems designed to run?

Answer:  Our systems are designed to run 24 hours a day 7 seven days a week. Our standard system will work in most states but some of the more northern territories may require additional solar & batteries.

 

Question: Do I furnish my own pole or can I purchase on from your company?

Answer:  You can do whichever is most convenient for you. If you would like to use your existing pole simply let us know what type of pole you will be mounting to so we can supply the correct mounting hardware or If you would like us to provide a pole please see our optional poles under the options tab on the website.

 

Question:  What is the lead time for these systems?

Answer:  Our typical lead time is 4-6 weeks ARO.

 

Question:  Can the system be AC powered?

Answer: Yes, the system can be AC powered.  We will use our standard DC powered system without the solar and add a power supply in its place to convert the AC power coming in to our DC powered system.

 

Question:  Do you provide any installation, mounting, and wiring instructions?

Answer:  Yes, we do provide all this information and more available on our website for each model under “Support Documents”.